Interlogix TVK-800 - Manual (Page 31)

TVK-800 User Manual 29
Import/export the configuration file
1. In the Main menu, click Keypad > Maintenance . The window appears.
2. Click Config File to enter the “Import/Export Config. File” window.
3. To import a configuration file:
1) Insert the USB flash drive into the keypad slot.
2) Enter the flash drive and select the file.
3) Click Import to import the configuration file.
Note: If the imported configuration is invalid, the following error message
appears, “Importing file failed: File type does not match.”
4. To export a configuration file:
1) Insert the USB flash drive into the keypad slot.
2) Click Export to import the configuration file.
Restore default settings
1. In the Main menu, click Keypad > Maintenance . The window appears.
2. Click Restore to restore the system to default. The following message appears,
“Restore Default?”
3. Click Yes to continue, or No to cancel the operation.
Device management
Use this menu to add, modify, or delete a device on the keypad. You can also set up
the keypad to remotely control a DNR or NVR.
The “Device-Device List” window lists all the devices that are in communication with the
keypad. See Figure 16 on page 30.
You can add devices to the keypad either by searching for all the devices available in
the same subnet, or by doing a manual search.