IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) - Manual (Page 32)

26
5 Cable Connection
5.1 Combination Cable Connection
The speed dome combination cable includes network cable, audio/video cable connection port, RS485
connection port, alarm input and output port. Please refer to the label for detailed information.
z
Please note the IE6 does not support alarm upload function. Please use IE7 or higher version.
z If it is your first time to boot up the WEB on the Windows 7 OS, please right click the Internet
Explorer icon on the desktop and then select “Run as Administrator”.
Name Function
POWER
GND Power port. Connect to the power cable.
GND: ground end.
485A
485B
GND RS485 remote control.
OUT Audio output port.
GND Ground port.
AUDIO
IN Audio input port.
GND Ground port. VIDEO
OUT Video output port.
LAN Network port. Connect to network cable.
z
Two alarm input channels. It is to receive relay signal from the
external alarm source. You can go to dome menu to activate
specified preset or patter.
z
When the activation mode is NO (normal open), dome alarms
when there is low voltage. High voltage will not activate the
alarm.
z
When the activation mode is NC (normal close), dome alarms
when there is high voltage. Low voltage will not activate the
alarm.
Note:
z
Dome alarm input message is ground mode.
z Dome alarm input signal are two modes: normal open and
normal close.
z For the default setup: 2-channel alarm input and 7-channel
alarm output is optional.
ALARM
IN
GND Alarm input ground end.
ALARM
OUT
1
z
One alarm output channel. When there is an alarm from current
channel, system activates relay or not.
z
Alarm output relay default setup is NO.
z For the default setup: 1-channel alarm output and 2-channel
alarm output is optional.
5.2 System Layout