IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) - Manual (Page 21)

15
DAY/NIGHT ：AUTO
DAY TIME ：07H 00M
NIGHT TIME : 19H 00M
THRESHOD : 4
SAVE
BACK
EXIT
o
3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
o
BLC: It is an abbreviation for back light compensation. System can compensate the object in
the dark light to achieve a clear video. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
o
WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.
z
DAY/NIGHT: Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z DAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY TIME
item and then click confirm button to go to setup. Please user up/down button to set the value. After
completed setup, please click confirm button to exit and move the cursor to Save button to save current
setup.
z NIGHT TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to save button to save
current setup.
z THRESHOLD: The speed dome can switch the day/night mode when it reached the threshold you set
here.
z SAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night time),
you need to move the cursor here and then click confirm button to save current time setup. For other
setups, you do not need to use this button.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.4 Focus Setup
z FOCUS MODE: It is to set the camera focus mode. It includes several modes such as auto, manual,
semiautomatic.
FOCUS MODE ：
FOCUS LIMIT：
FOCUS SENSITIVITY ：
IR LIGHT FOCUS CORRECTION：
BACK
EXIT