IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) User Manual
Page 19
13
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
z
WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go
to the third menu.
z
EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to
the third menu.
z
DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button, you
can go to the third menu. There are three options: auto/manual/off. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set. Please make sure your product supports this
function.
z
PICTURE ADJUSTMENT: It is to set the camera hue, saturation, color control, gama, contrast,
brightness. There is the third menu. Please move the light to highlight current item and then click the
OK button to go to the next level menu.
z
FOCUS SETUP: It is to set the camera focus mode, focus limit and etc. Please move the light to
highlight current item and then click the OK button to go to the next level menu.
z
ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
APERTURE CONTROL LEVEL: System can auto reduce the aperture to lower the video noise when it
is in low illumination environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
NEXT PAGE: It includes the following options: APERTURE CONTROL LEVEL. DIGITAL ZOOM,
PICTURE FLIP, FREEZE FUNCTION, AF SENSITIVITY, CAMERA FACTORY DEFAULT SETUP,
CAMERA RESTART. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
z
WHITE BALANCE MODE: Set white balance adjustment mode. There are several modes such as auto,
auto trace white balance, indoor, outdoor, and manual and etc. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
R GAIN: Before you set R GAIN option, please note the mode shall not be auto. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETUP
ZOOM SPEED : 08
APERTURE : 09
APERTURE CTRL LEVEL :8
NEXT PAGE
BACK
EXIT
WB MODE ： AUTO
R GAIN ： 220
B GAIN ： 150
BACK
EXIT