Brother 875 MC - Manual (Page 86)

The Caller ID is Stored in Your Machinées Memory
The machine can store a maximum of the last 30 incoming caller IDs in the memory, along with
the time and date of reception. The 31st call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be scrolled through on the display.
And you can also print the Caller ID list and review calls you received by checking the Caller IDs
(see page 7-20). This report will list the Date, Time, Phone Number (Caller ID), Name (in certain
states), and type of call (Comment).
NOTE: Please set up the number of rings to more than 02 in the Ring Delay (see page 7-2) before
you use the Caller ID. If you set up the number of rings to 01, you can not receive the
Caller ID.
Scanning through a Caller ID in the Memory
You can display the caller IDs that are stored in the memory to see who called you. (You can skip
to Step 4 below by pressing the SHIFT and TEL INDEX keys simultaneously.)
KEYS TO PRESS
VI i.-i
1. Press FUNCTION.
2. Press 6 .
3. Press 7.
4. Press SET.
The Caller ID of the last call will appear
on the display.
- If no ID is stored, the beeper will sound
and “NO CALLER ID” will appear on
the display.
5. Press (left arrow) or (right
arrow) key to scroll through the
Caller IDs in the memory.
In this example, press the key 5
times.
- Pressing the key will cycle back­
ward through the stored caller IDs
from the latest to the oldest. If you
press the key when the oldest ID
appears, the latest one will appear.
The key cycles forward.
- After 2 seconds, the date and time the
caller ID was received will appear.
6 . Press STOP to exit.
THE DISPLAY WILL SHOW:
KiiiliillMiliiilliii
liiiiiiiiiiiiiiiigiiil
[ 2 5 ) 5 5 5 5 1 5 1
6E1ÌÌBÌÌiÌBÌIÌÌSiÌMIÌKÌ)