Telephone function sewngs, Setting the dialing mode (tonelpulse), Press function – Brother 875 MC User Manual
Page 36: The display will sho, Telephone function settings, Setting the dialing mode (tone/pulse) -1, Li lit, Function, Stop
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. TELEPHONE FUNCTION SEWNGS
There are some settings, such as the date and time, you should make to your fax machine before
you begin using it. Once entered, these settings will remain in the machine until you change them.
You
can
begin
customizing
the
settings
by
pressing
FUNCTION
on
the
control
panel.
This
activates
the
function
mode
and
On
-
Screen
Programming
prompts.
You
can
complete
a
variety
of settings in this mode.
Setting the Dialing Mode (TonelPulse)
_____________________________
Your
fax
machine
supports
both
tone
{or
multi-frequency)
and
pulse
(or
rotary)
dialing.
It
is
initially set to TONE, so you do not need to change the setting if you use that kind of line. If you
are using a pulse dial line, you can change the setting to PULSE by following the steps below:
¡Hi'
1.
Press
FUNCTION.
You will see scrolling options on the dis
play. You can choose one.
2. Press
6
.
3. Press 1.
After two seconds you will be automati
cally prompted to select pulse or tone.
4.
Press
(left
arrow)
or
(right
arrow) to find the dialing mode
that matches your telephone line.
Example; PULSE.
5. Press
SET.
6
.
Press
STOP
to return to the date
and time.
THE DISPLAY WILL SHO
li lit!
iiaiiMiBaBiiiiMasiH
liiaijgiiiiSwEiiiiiBili
k ( S E L L C I ^
liiifiiiiiilliiliii
Setting the Beeper Sound Level
If the beeper setting is LOW or HIGH, it will “beep” every time you press a key, make an error,
or at the end of sending or receiving a feix.
The initial setting on your fax machine for the beeper is LOW. If you do not want the beeper on,
select OFF, and if you want it loud, select HIGH.
4-1