Brother Fax-615 - Manual (Page 76)

iBBgIpIlliiiiliîii
iii
What Must I Do to Set up Distinctive Ringing?
To use the Distinctive Ringing feature you must:
1. Get the distinctive ringing service from your telephone carrier.
2. When your distinctive ringing number is available, register it in the function called Setting
the Distinctive Ringing Function.
3. Keep the fax machine in MANUAL answer mode {both AUTO and F/T lights turned off.)
Setting the Distinctive Ringing Function __________________
This function is a one-time procedure to register a distinctive ringing number with your fax
machine. Your fax machine will answer the registered number automatically, simulating AUTO
answer mode on a dedicated fax line. You can register only one number. Do not try to set up
this function if you do not have the distinctive ringing service. It may cause your fax
machine to malfunction.
This procedure is in two parts: First, you must put the fax machine in SET mode; D/R SET MODE
will be on the display screen. Second, you must wait for your friend to call the distinctive ringing
number so you can register the ringing pattern, When a call comes in, do not pick up the handset
until the fax display says PICK UP TO SET. Then pick up the fax handset. If the caller dialed your
distinctive ringing number, press START and check that the display says REGISTERED before
you hang up. If the caller dialed the other number, press STOP and hang up to try again.
Before you begin this function:
1. If you have a telephone answering device, unplug it until after you have finished registering
the distinctive ringing number.
2. Have a friend ready to call your distinctive ringing number.
After you complete this one-time setup:
1. The Distinctive Ringing function automatically will be changed from SET to ON. Distinctive
Ringing operates in MANUAL mode, so you must keep the AUTO and F/T lights
turned off.
2. Be sure to have your friend call you on both numbers to test that everything is set up correctly.
3. If you do not complete this function by pressing START to register a number, your machine will
stay in MANUAL mode. So, if you decide not to register a number, you must repeat Steps 1-
6 and in Step 4 change the mode to OFF.
U, lilii KEYS TO PRES
1. Press FUNCTION.
2. Press 6 .
3. Press 6
.
4. Press (left arrow) or (right
arrow) to find the SET mode.
5. Press SET.
THE DISPLAY WIL
C
ilifuiii
lIlililliMllllliliilliMllllliil
iBtiiiiiBliBliBK'S
iliiiiiiaiiltsiiii)
:)
7’14