Brother Fax-615 - Manual (Page 46)

2. Enter a fax number.
Example; One-Touch dialing.
3. Press START. r P I A L I N i
i S E N D I N G '
Sending a Fax Manually
1. Insert the documents face down
into the feeder.
2. PickupthehandsetorpressHOOK
and listen for the dial tone.
3. Enter the fax number.
You can use manual dialing, One-Touch
dialing, Speed Dialing, or Tel-Index (Only
for FAX-715M/725M).
4. When you hear a fax tone, press
START.
Your fax machine will begin sending the
documents.
5. Return the handset to its cradle, if
you did not use HOOK.
ililglllliilliittiBil
^ ( E N T E R F A X № . ^
IMillBIiiMlllMMIlBBl
Automatic and Manual Re-dialing
If a number you have dialed is busy or your call did not go through for some other reason, you can
re-dial that number. There are two ways to re-dial, “automatic” and “manual.” Automatic
redialing can only be used for faxes that were sent using automatic transmission—not for
telephone calls. The factory setting is “auto re-dial on” and it will re-dial the number 3 times at
5 minute intervals automatically before giving up. The fax machine will also re-dial the last dialed
number when you press REDIAL/PAUSE (manual re-dialing).
6-5