Brother Fax-615 - Manual (Page 49)

4. Enter the time in 24-hour format
using the number keys.
Example: 19:45 (7:45 P.M.).
5. Wait for two seconds, press STOP
to exit.
iliiiiiiPHBaiWiiiiiii
iijliiliiiiiiiiiiiijtiii
iigaiiMiMiigiiii
Broadcasting (Only for FAX-7 15MI725M)
By using the numbers you have stored for One-Touch dialing, Speed-Dialing, or group dialing, you
can send faxes automatically to a maximum of 60 different locations at once.
You can not broadcast to a number that has not been stored into memory.
THE DISPLAY WILL SHOW:
1. Insert the documents into the
feeder.
2. Press Q.SCAN.
3. Enter the One-Touch and Speed-
Dial numbers, one after the other,
or only a group number.
Example: Group number.
4. Press START and the fax machine
will read the documents into
memory, and then start sending
faxes to all the numbers you en­
tered.
^ iiiliiiMiiigMiiliiiil
iMsiiliaigigiiliiiil)
t D I A L I N G
iiilililliilliilH
* To stop the broadcast in progress, press STOP.
* Enter the chain dialing numbers as you normally would, but keep in mind that
each key counts as one location, so the number of locations you can call becomes
limited. You have up to 60 locations. You can call with One-Touch, Speed-Dialing,
and group numbers.
* If the line is busy or for some other reason a connection could not be made during
broadcasting, the fax machine will re-dial the number automatically. {See page 6-
5.)
* If the memory is full, press STOP to abort the job or press START to send the
portion that is in the memory (if more than one page has been scanned.) (See page
6
- 6 .)
6-8