AltiGen MAXCS 7.0 Adv Call Router - Manual (Page 7)

Advanced Call Router
Advanced Call Router Manual 3
4. In the Logon Info window, enter the Server Name that Advanced Call
Router will connect to, along with the Default Virtual Extension and
Password then click OK.
(Optional) Check Auto Start Service to have Advanced Call Router
start routing calls automatically, after the system restarts or after
Advanced Call Router service has been stopped and restarted.
Note: Up to 8 login attempts are allowed, after which login will be
disabled from 1 to 24 hours (depending on the setting in
MaxAdministrator).
5. Click Start to run Advanced Call Router. When Advanced Call Router
is stopped, you can configure the server and login information.
6. Route Rules and Show Monitor can be configured after Advanced Call
Router is started.
Advanced Call Router Route Rules
To create route rules that will be used to route calls, select Operation >
Route Rule to open the Route Rule List window. This window also allows
you to view existing route rules, and modify and delete route rules.