AltiGen MAXCS 7.0 Adv Call Router - Manual (Page 5)

Advanced Call Router
Advanced Call Router Manual 1
Advanced Call Router
Advanced Call Router is the standard AltiGen Call Router application plus
call router service. Advanced Call Router requires the purchase and
activation of an Advanced Call Router license.
Note: The workgroup to which incoming trunk calls will be routed via Call
Router must be assigned to the auto attendant whose Action is set
to “Adv - Advanced Call Router,” with Ext Num set to the virtual ex-
tension you use to configure Call Router. For information on config-
uring auto attendants, refer to the Auto Attendant Configuration
chapter of the MAXCS 7.0 Administration Manual.
Requirements
Supported Operating systems:
• Windows Server 2003 SP3
• Windows Server 2008 SP2 (32-bit)
• Windows Server 2008 R2 SP1 (64-bit)
Minimum system requirements:
• Intel 2GHz Pentium 4 or equivalent
• 40GB available hard drive disk space
• 1GB RAM
Installation
To install Advanced Call Router,
1.
Run the .exe file from the Advanced Call Router Installation CD.
2. Setup will confirm the destination for the Call Router application (default
is C:\Program Files\AltiGen\Call Router).
To select a different location, use the Browse button to choose the new
location.
3. Click Next to proceed.
Note: Advanced Call Router Service requires the purchase and
activation of the Advanced Call Router license.