AltiGen IP 705 - Manual (Page 37)

User Guide
IP 705 Manual 29
Release
For a connected call:
• Press the Release button to hang up the call.
While in a menu:
• Press the Release button to exit the menu.
For an incoming call:
• Press the Release button to reject the incoming call.
Restore
Default
Settings 1) Press the Menu button.
2) Press * * 2, then the Enter button.
Ring Tones
1) Press the Menu button.
2) Select PHONE SETTING, and scroll to RING TONES.
3) Select a ring tone and press the Enter button.
Program-
mable Key*
• N/A
• BLF
• Feature
Code
• Admin
Defined #
• EXT
Speed Dial
• Line Park
• Call
Record
• User
Defined #
• Headset
1) Press the appropriate key (keys 1-5) to initiate one of the fol-
lowing functions pre-assigned by the system administrator:
Busy Lamp Field, AltiServ Feature Code, Admin Defined #,
EXT Speed Dial, Line Park, Call Record, User Defined #,
Headset.
To configure a programmable key with Phone Setting
enabled:
a. Press the Menu button, select PHONE SETTING, and
press the Enter button.
b. Scroll to PROGRAM KEYS and press Enter.
c. Select the key to program, and press Enter.
d. Enter the appropriate digits for the speed dial number or
feature code, and press Enter.
The digits are automatically dialed when this function key is
pressed.
Speaker
To use the speakerphone:
1) Press the Speaker button.
2) To disconnect the call, press the Speaker button again.
Function Key Sequence