AltiGen IP 705 - Manual (Page 17)

The IP 705 Phone
IP 705 Manual 9
Call Log
Shows the history of
incoming calls, up to 99.
• Pressing the Enter button will
dial the number displayed. If 20
seconds pass without any input,
the phone exits the Call Log.
Call Record
Allows a programmable
key to be used for on-
demand recording.
• Must be enabled by the system
administrator.
• User presses the key to start
recording, presses the key again
to stop recording. There is no
pause function. When the call is
recording, the light is on.
• Recorded conversations can then
be played back through voice
mail or accessed at a centralized
location.
Conference
button
Initiates a conference and
adds in other parties one at
a time.
• Single Call Waiting, Multiple
Call Waiting or Live Call
Waiting must be enabled for the
extension by the system
administrator or in AltiView/
AltiAgent in order to add
incoming calls to a conference.
• The user who initiates the
conference call can select another
conference member’s call and
drop it from the conference by
disconnecting the call. The
feature is unavailable to all other
conference members, even when
the conference initiator hangs up.
Workgroup
Status
Displays the workgroup
status in the LCD when
you press the Down
arrow.
• The system administrator must
have configured workgroup status
display for your phone.
Flash button
Signals PBX that special
instructions will follow.
Headset
The system administrator
can configure a key as a
Headset key. When
pressed, the user will be
able to activate the RJ-9
headset port.
• This button is used as a hook
switch for headset ports.
Feature Description Notes