AltiGen IP 705 - Manual (Page 19)

The IP 705 Phone
IP 705 Manual 11
American Disabilities Act (ADA) Compliance
The hearing aid-compatible handset on the IP 705 phone is equipped with
a magnetic coupler, which meets the ADA HAC requirements.
The dialing pad also complies with ADA standards.
Release button
Releases a call from the
connected state. Deletes
characters entered on the
LCD. While onhook,
releases the phone from an
active state. Rejects an
incoming call. When you press the Release button to
reject an incoming call, the ringing
will stop and the call will follow the
extension's Ring No Answer (RNA)
handling rules.
Ring Tones
You can select from one
of several ring tones. • Custom ring tones are not
supported.
Speaker button
Enables use of speaker
phone.
Transfer
button Transfers an active call to
another number.
• This button cannot be used to
“flash” after being used to
transfer a call. To reconnect to a
call after using the Transfer
button, use
thebutton or the Flash button.
Voice Mail
button Enables access to voice
messages.
• The VM count that appears in the
LCD reflects new messages
(previously heard messages are
not included).
Feature Description Notes