AltiGen IP 705 - Manual (Page 16)

8 IP 705 Manual
Supported Telephony Features
The IP 705 provides a broad range of call handling and dialing features
directly on the phone and through the AltiWare system. The following table
lists the supported features, a brief description of each, and configuration
and use notes where applicable.
Feature Description Notes
Auto Answer
When a call comes in, the
IP phone will ring for a
specified number of
seconds, connect the call,
and automatically answer
through the speaker or
headset.
• During ringing, the user can
manually pick up the call from
headset, handset or speaker.
Auto Answer
Ring
When Auto Answer is set
to Yes, specifies how
many seconds the IP
phone should ring before
the call is automatically
answered (1-20 seconds).
Auto Answer
Dev [device]
When Auto Answer is set
to Yes, specifies whether
the call should be
automatically answered
through the speaker or
headset.
Busy Lamp
Field (BLF)
Associates a programma-
ble key with an extension
that can be automatically
dialed when selected; the
key’s light indicates that
the extension is busy and
blinks when ringing.
The BLF ring tone is
played only when the
phone is in idle state. It is
stopped when the destina-
tion phone stops ringing
or the local phone exits
idle state.
When multiple BLF
extensions ring
simultaneously, the IP
phone will play the first
BLF extension ringer and
beep tones and ignore
other BLF extensions.
• Must be configured by the system
administrator.
• The BLF feature can be assigned
only to internal extension
numbers, not outside numbers.
• The feature is not available in
BASIC mode.