Industrial Data Systems IDS 160 - Manual (Page 4)

3.4 CONFIGURATION OF WEIGHING APPLICATION OPTIONS
.
3.4.1 SELECT SCALE INTERFACE TYPE
3.4.2 CONFIGURE SCALE UNITS.
3.4.3 CONFIGURE DECIMAL POINT.
3.4.4 CONFIGURE COUNT/PULSE.
3.4.5 CONFIGURE TRIP LEVEL.
3.4.6 CONFIGURE TIMEOUT TIME.
3.4.7 CONFIGURE SETTLE TIME.
3.5 INITIALIZE PRINTER TO FACTORY SETTINGS.
4. MAINTENANCE
4.1 REMOVAL OF DIRT AND STAINS.
4.2 LUBRICATION.
4.3 PRINT RIBBON REPLACEMENT.
5. TESTING AND TROUBLESHOOTING
.
APPENDIX I. SERIAL COMMUNICATIONS PORT.
APPENDIX II. CONFIGURATION REFERENCE LIST
APPENDIX III. ASCII CONTROL CODES
APPENDIX IV. ASCII CHART