Industrial Data Systems IDS 160 User Manual
Page 19

3.2.5 CONFIGURATION: PRINT SIZE.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 2.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 3.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for Host Control of Print Size.
1 for NORMAL SIZE PRINT.
2 for ENHANCED SIZE PRINT (double width).
3 for MIXED SIZE PRINT (numbers large,
letters small).
7. Press the ENTER switch. The ENTER light turns off.
---------------- PRINT SIZE ---------------
FLASH ON OFF (Enter Light)
Host Control of Size 2 3 0 (Thumbwheel Switch)
Normal Size Print 2 3 1 (Thumbwheel Switch)
Enhanced Size Print 2 3 2 (Thumbwheel Switch)
Mixed Size Print 2 3 3 (Thumbwheel Switch
)
REMEMBER:
Return the thumbwheel switch to the correct mode position
after configuration