Industrial Data Systems IDS 160 User Manual
Page 15
3.2 CONFIGURE PRINT FEATURES.
The following list shows how the print features are set at the factory.
3.2.1 AUTO LINE-FEED AFTER CR = ON
3.2.2 AUTO FORM FEED = ON
3.2.3 AUTOMATIC PRINT WRAP = ON
3.2.4 BOTTOM MARGIN = 8
3.2.5 PRINT SIZE = NORMAL
3.2.6 STATION NUMBER = DISABLED
3.2.7 PRINT ONLY HEADING = DISABLED
Use the following sections to change the settings.