Industrial Data Systems IDS 160 - Manual (Page 24)

3.3.3 CONFIGURATION: SET DATE
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 4.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel to the first digit of the month.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel to the second digit of the month.
7. Press the ENTER switch.
8. Turn the thumbwheel to the first digit of the day of month.
9. Press the ENTER switch.
10. Turn the thumbwheel to the second digit of the day of
month.
11. Press the ENTER switch.
12. Turn the thumbwheel to the first digit of the year.
13. Press the ENTER switch.
14. Turn the thumbwheel to the second digit of the year.
15. Press the ENTER switch.
16. Press the ENTER switch. The ENTER light turns off.
-------------------------- SET DATE -------------------------
Set FLASH ON ON ON ON ON OFF (Enter Light)
DATE 4 mo mo day day year year (Thumbwheel Switch)
REMEMBER: Return the thumbwheel switch to the correct mode position after configuration