Hardy ANY-WEIGH Bench Scales - Manual (Page 13)

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
Preinstallation
Precautions Do not store or operate the scale out of its specified
temperature range. (See Temperature Ranges in Chap-
ter 2)
Do not store other equipment on the scale when it is
not in use or in storage.
Do not allow a build-up of debris on, around or under
the scale.
Do not set the scale in water or allow water to settle
around the scale. Provide Proper drainage.
Do not let moisture get on or into any of the electrical
interconnections.
Do not allow static or other electrical discharges
through the scale.
Do not try to remove the top plate.
Do not try to repair the scale. Contact Hardy Instru-
ments Technical Support Department for any and all
repairs.
Unpacking The Any-Weigh Bench scales are shipped fully
assembled and only require adjustment of the leveling
feet. If there is any damage to the shipping container
or to the scale, save all the packaging material and file
a report with the shipper.
Leveling the Scale Step 1. Place the spirit level across each corner
and adjust if necessary to level the corners.
(See Fig. 3-1)