FRITSCH LABORETTE 24 with V-shaped channel - Manual (Page 8)

By using the LABORETTE 24 the customer agrees with this and recognizes
that defects, malfunctions or errors cannot be complete excluded. To
prevent risk of damage to persons or property or of other direct or indi-
rect damage, resulting from this or other causes, the customer must
implement sufficient and comprehensive safety measures for working
with the LABORETTE 24.
Neither compliance with this manual nor the conditions and methods
used during installation, operation, use and maintenance of the LABOR-
ETTE 24 can be monitored by Fritsch GmbH. Improper execution of the
installation can result in property damage and thus endanger persons.
Therefore, we assume absolutely no responsibility or liability for loss,
damage or costs that result from errors at installation, improper opera-
tion or improper use or improper maintenance or are in any way con-
nected to these.
The applicable accident prevention guidelines must be complied with.
Generally applicable legal and other obligatory regulations regarding
environmental protection must be observed.
2.4 Information on hazards and symbols used in this manual
Safety information in this manual is designated by symbols. Safety infor-
mation is introduced by keywords that express the extent of the hazard.
DANGER!
This symbol and keyword combination points out a directly
hazardous situation that can result in death or serious
injury if not avoided.
WARNING!
This symbol and keyword combination points out a possibly
hazardous situation that can result in death or serious
injury if not avoided.
CAUTION!
This symbol and keyword combination points out a possibly
hazardous situation that can result in slight or minor injury
if not avoided.
Safety information
Safety information and use
- 8 -