Aviom MH10f - Manual (Page 24)

17 r
eAr
P
ANel
F
eAtures
The MH10f can be powered via its internal power supply or an optional
external 24 volt supply.
Both internal AC and external DC power sources can be connected
simultaneously. Backup power is not available on the MH10.
A-Net Ports
Ten EtherCon jacks are provided for A‑Net connections on the MH10,
numbered 1 to 10. The MH10f has eight EtherCon jacks. Connections can use
standard RJ45 cables or cables outfitted with the locking Neutrik EtherCon
connector.
In addition to the eight EtherCon jacks, the MH10f has two 100 Mbps SFP
fiber optic ports, which are numbered 9 and 10.
The actual functionality of the ten ports on a Merger Hub is determined by
the current network mode (Auto or Manual) and the setting of the Manual
Mode configuration when using Manual Mode.
In Auto Mode, all ten A‑Net ports perform the same function. Cables from
any compatible Pro64 device can be plugged into any available port. Multiple
MH10 or MH10f units can be used simply by connecting them using any
available A‑Net port. There is no need to match MH10/MH10f port numbers
(port 1 connected to port 1, etc.).
The MH10f (shown) has eight EtherCon and two SFP fiber connectors. The
ten A-Net ports on the MH10 each have EtherCon connectors.