Aviom D800-Dante - Manual (Page 41)

33 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
32-64 Channels - Analog Inputs
Up to four analog input devices may be connected to a D800 by cascading the A-Net ports on the A-Net
input devices. The first input device in the system (Input Module 1 in the diagrams) can be an original
AN-16/i Input Module or AN-16/i-M Mic Input Module. By default these devices supply network slots 1-16.
To configure this system:
• Set the S
lOt
r
ANge
switch on AN-16/i v.2 Input Module #1 to 1-16.
• Connect A-N
et
O
ut
on #1 to A-N
et
I
N
on AN-16/i v.2 Input Module #2 with a Cat-5 cable.
• Set the S
lOt
r
ANge
switch on AN-16/i v.2 Input Module #2 to 17-32.
• Connect A-N
et
O
ut
on #2 to A-N
et
I
N
on AN-16/i v.2 Input Module #3.
• Set the S
lOt
r
ANge
switch on AN-16/i v.2 Input Module #3 to 33-48.
• Connect A-N
et
O
ut
on #3 to A-N
et
I
N
on AN-16/i v.2 Input Module #4.
• Set the S
lOt
r
ANge
switch on AN-16/i v.2 Input Module #4 to 49-64.
• Connect A-N
et
O
ut
on #4 to the A-N
et
I
N
on a the D800.
Four analog input modules create a 64-channel network.