Aviom D800-Dante - Manual (Page 12)

4 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Compatibility
The D800 A-Net Distributor is compatible with Pro16, Pro16e, and Pro64 A-Net devices as detailed below.
Pro16 Products
The A-N
et
O
ut
from the following Pro16 devices may be connected to the D800 or D800-Dante’s rear
panel A-N
et
I
N
port:
• AN-16/i v.2 Input Module
• AN-16/i Input Module
• AN-16/i-M Mic Input Module
• AV-M8 Mic Input Module
• Aviom16/o-Y1 A-Net Card for Yamaha® devices
• A-16II Personal Mixer
• A-16R Rack-mount Personal Mixer
• AN-16/o Output Module
• AV-P2 Output Module
• A-16D and A-16D Pro A-Net Distributors
• Other D800 or D800-Dante A-Net Distributors
• Third-Party Pro16 A-Net digital console cards
In addition, the A-N
et
B
rIdge
output from the SB4 System Bridge may also be connected to the A-Net input
of the D800.
Pro64 Products
Adding the ASI A-Net Systems Interface to a Pro64® digital snake or audio network allows Pro64 channels
to be translated into Pro16 data. The ASI separates the 64-channel Pro64 stream into four 16-channel Pro16
outputs, each of which can be assigned any combination of the available active Slots within the Pro64
network. Any of the four Pro16 A-Net outputs from the ASI may be connected to the A-N
et
I
N
on the D800.
Optionally, up to four Pro16 A-Net outputs from an ASI may be connected to the D800 if they are first
connected to an SB4 System Bridge.
The ASI’s Pro16 A-Net outputs can also be connected to the A-N
et
I
N
on the AN-16/i v.2 Input Module when
creating a personal mixing system that uses the enhanced Pro16e version of A-Net for increased channel
count.