Aviom D800-Dante - Manual (Page 40)

32 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
32-Channels - Analog & Digital Inputs
This hybrid system uses one digital console card plus one analog AN-16/i v.2 Input Module to provide up
to 32 inputs to the network. The console card provides network slots 1-16 of the network; the AN-16/i v.2
Input Module provides slots 17-32.
To configure this system:
• Connect A-N
et
O
ut
on the console card to A-N
et
I
N
on the AN-16/i v.2 with a Cat-5 cable.
• Set the S
lOt
r
ANge
switch on the AN-16/i v.2 to 17-32.
• Connect a Cat-5 cable from A-N
et
O
ut
on the AN-16/i v.2 to A-N
et
I
N
on the D800. (If the
D800-Dante is used, the Dante Disable DIP switch (#10 in Switch Block 1) must be in the
up position to use the A-Net input. The Dante interface’s Stereo Link DIP switches are
ignored)
• Set Stereo Links as needed on the console cards and/or AN-16/i v.2.
• Connect Personal Mixers to the D800’s front panel A-Net ports.
• Create custom channel maps for A360 Personal Mixers with the free A360 Channel
Manager software.
The A-Net Out from the console card connects to the analog input module’s A-Net In port. The Pro16e A-Net Out on the
AN-16/i v.2 connects to A-Net In on the D800.
P N
ote
: If A-16II and A360 Personal Mixers will both be used in this type of network, it is important
to note that the A-16II will ignore network slots 17 and above. Make sure you assign audio
sources that are critical for users of the A-16II to slots 1-16 of the network.