Adaptive Technologies UB-3RDX-60 - Manual

 2013 Adaptive Technologies Group, Inc. www.adapttechgroup.com REV00-1213
UB-3RDX-60
U-Bracket Tilt Adapter
Installation Guide
The UB-3RDX-60 is an interface that provides a third axis of
rotation for U-Bracket speaker mounts that are suspended
from overhead structures.
This interface adapts to standard schedule-40 ½” NPT and
BSPT standard threaded steel pipe to allow speakers to be
positioned as close or as far away from the ceiling as desired.
Signal wire to the speaker may be routed through the pipe
and through the upper housing of the UB-3RDX-60 to provide
a clean installation appearance.
Warning:
Mounting and/or rigging loudspeakers requires experienced
professionals.
Improperly installed loudspeakers can
result in property damage, personal injury, death
and/or liability to the installing contractor.
To assure a trouble free installation, read through and follow
these instructions carefully before beginning
. If you have
doubts about the integrity of the structure you are mounting to or with the proper mounting hardware, consult
a local structural or hardware specialist.
Note to Installing contractor:
Due to the wide variety of overhead structures,
materials and mounting methods, the installing
contractor must exercise good judgment in
selecting the proper mounting area and
hardware.
Be sure that all of the following items are
included in this kit before proceeding:
Qty.
Description
1 pc U-Bracket Tilt Adapter Assembly
1 pc Instruction sheet
1 kit Hardware kit
Figure 1