Adaptive Technologies TCK-022-S - Manual

 Allen Products Co., Inc. Signal Hill, CA 90755 (562) 424-1100 0503
For Steep Angles For Medium Angles For Shallow and Medium Angles
Requires an extra pair of fixed length cables
Steerables
   
Tilt Cable Kit
Installation Instructions
The Steerables  Tilt Cable kit serves as a suspension and pull back device for flyable loudspeakers and can be used in a wide range of rigging applications. It
provides an easy and infinitely adjusting tilt feature for loudspeakers and other objects weighing up to 220 lbs. (134 kg). The Steerables  Tilt Cable Kit comes in
standard fixed cable lengths of 8.25”, 10”, 14”, 18” and 22”. Custom length tilt cable kits are also available.
The Steerables
 Tilt Cable Kit contains all the necessary hardware to hang one loudspeaker in a two point or 3 point configuration. One kit includes a pair of
structural fixed length cables, an adjustable pull back cable, shackles, clutch lock and pulley. A four point configuration requires an extra pair of fixed cables.
Warning:
Mounting and rigging loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury,
death and/or liability to the installing contractor. Due to the wide variety of building structures, materials and methods, this instruction guide assumes that the
installing contractor will exercise proper judgment in selecting the proper rigging area, suspension points and equipment.
Be sure that all of the following items are included in this kit before proceeding:
Before Starting:
Select the type of application from the illustrations below then go to the corresponding page that describes that application. The application will depend
on the mounting points available on the speaker.
Anchor Shackle (5 pcs) Pulley Assembly (1 pc) Clutch Lock assembly (1 pc) Cable ties (5 pcs)
Fixed length structural cable (2 pcs) Pull back cable (1 pc)
Two Point Configuration Three Point Configuration Four Point Configuration