How the intro scan function works, Index repeat playback – Panasonic NV-F65EA User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How the Intro Scan Function Works...

Tape is

Playback for about
10 seconds

The Intro Scan function plays back the first 10 seconds of
each programme (recorded with index signal) on a tape one

after another. This is convenient for quick checking what
programmes are on a tape, or to find the desired instalment
of a TV series you have recorded on a tape.

O Insert a video cassette.

(Put the VTR in the stop mode.)

^ Press the Memory/Repeat/Search Button until “S”

appears.

(The Intro Scan starts.)

Q When the desired scene is reached, press the Play

Button.

•The Intro Scan function may not be activated for the

first programme recorded close to the beginning of
the tape.

•The Intro Scan function may not be activated, if the

interval between programme starts is less than
5 minutes in the LP mode, or less than 2 minutes in
the SP mode.

Index Repeat Playback

^ Index Signal

Repeat Playback

PLAY

REW

When the VTR is in the playback mode, press the

Memory/Repeat/Search Button so that the “RS” In
dicator lights up.

•When the next index signal is found, the tape will be

rewound. When the index signal, where the playback
is to start, is found, the playback will restart. In this

way, automatically repeated playback can be per
formed for a tape portion as defined by the number of

index signals that are skipped.

To stop the Index Repeat playback, press the Stop

Button or press the Memory/Repeat/Search Button so

that the “RS” Indicator goes out.

If Index Repeat playback is performed on a tape for
long periods of time, the picture quality may become
inferior.