Panasonic NV-F65EA - Manual (Page 10)

tyNiNGTHlTV SET T&THE VIDEO PLAYBACK CHANNEL
The adjustments described on this page are not necessary,
if the VTR is connected to the TV set via the Video/Audio
output sockets.
Video Playback Channel Selector
This switch is used to select the Video Playback channel
which is not occupied with any TV station (2 or 3).
OFF I T|lON
o
e
TEST SIGNAL
© O
Turn the TV set on and select the AV programme
position or another programme position that is not
occupied by any TV station.
Press the VTR On/Off Switch to turn the VTR On.
(FRONT SIDE)
VTR
•The corresponding indicator lights up.
@ Press the VTR/TV Selector to “VTR” position.
(FRONTSIDE)
VTR/TV
•VTR Indicator will appear in the, Multi-Function Dis­
play.
^ Set the Test Signal Switch to “On”.
OFF I ION
TEST SIGNAL
Tune the selected programme position (channel) of the
TV set to VHF channel 2 or 3.
Confirm on your TV set that the received test pattern is
as shown.
©
Set the Test Signal Switch to “Off”. Your TV is now
ready to receive the RF output signal from the VTR.
— .
OFF \ ION
TEST SIGNAL
e
©
To check, play back a pre-recorded tape and confirm
picture quality.
In some cases, further fine tuning is required in order to
get optimum colour and sound. Note that the test signal
is only a guide.
(¡ 0 )