Vcr plus+ setup, At first, choose your connection type, Connection type a – Panasonic OMNIVISION PV-8660 User Manual
Page 28: Connection type b, Easy taping
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Easy Taping.
VCR Plus+ Setup
VCR Plus+ programming allows you to set most items of a timer recording by simply entering
a special code (PlusCode) found in TV GUIDE magazine as well as the TV listings in
selected newspapers. In order for your VCR to do a VCR Plus+ recording, or a timer
recording of cable stations, some setup is required.
At first, choose your Connection Type.
(Then, follow the instructions under the diagram.)
Connection Type A
1 C
From Cable
Back of VCR
RF Coaxial Cable
(supplier))
Back of TV “""''
Or,
Back of VCR
Back of TV
If your system connection looks like one of
the diagrams above, do the following.
1. Complete “Cable Box Setup” on page 29.
2. Skip page 30 and go directly to page 31 for
VCR Plus+ Programming.
Connection Type B
Back of VCR
Back of TV
From Antenna
Of
Cable
Cable/i
Antenna]
GSi) 1
RF Coaxial Cable
(supplied)
Or,
______ Back of VCR
From Antenna
or Cable
Back of TV
RF Coaxial Cable
(supplied)
This connection allows
viewing (not recording)
of scrambled channels.
If your system connection looks like one of
the diagrams above, do the following.
1. Skip “Cable Box Setup” on page 29 and
turn to page 30.
2. Complete “VCR Plus+ Chiannel Setup”
on page 30.
3. Turn to page 31 for VCR Plus+
Programming.
28