T^p^operauoir(cor, Vms index search system, Direct access – Panasonic OMNIVISION PV-8660 User Manual

Page 24: For normal and/or timer recordings), Search,” and then press, 3 press a numbered key to, To calculate the index number

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

T^p^OperaUoir(cor^^

*lmportant:

If the remote control POWER, ACTION, PROG,

CHA/T,

INDEX or ADD/DLT button does not

work when pressed, press the VCR button on the remote and try the button again.

VMS Index Search System

Each time you start a recording, an invisible index mark is placed on the tape. When timer recordings are

made, program index and program information (see “Time Stamp Feature” on page 21) are also included.
You can then use these index marks to access or scan your recordings.

Direct Access

(For normal and/or timer recordings)

This feature allows you to go directly to the recording you want from
anywhere on the tape by entering the appropriate index number.

SELECT SEARCH MODE

PROGRAM INDEX SEARCH

SELECT:* ▼ KEY
SET :► KEY

END :INDEX KEY

Press INDEX* to display the

“SELECT SEARCH MODE” screen.

• This screen appears only if there are timer

recordings on the Program Index list. If this

screen does not appear, go to step 3.

Press

to select “INDEX

SEARCH,” and then press ►

to display the “INDEX” screen.

Press a NUMBERED key to

select the desired recording.

• To calculate the number, see below.

Press REW or FF to start a reverse

or forward search.

• When the designated location is reached,

the VCR goes into Playback mode.

To calculate the Index Number

Count forward or backward each recording starting point, including

the recording you want to see, from wherever you are on the tape.

Example 1:
If you are watching recording 4 and you want to watch recording 2, count the

start points to number 2. The total is 3. Enter 3 in step

“3"

and press REW.

til

1 l,l.2,;jli..3»i;i

Example 2:
If you are watching recording 2 and you want to watch recording 6, count

the start points to number 6. The total is 4. Enter 4 in step “3" and press FF.

NOTE:

indicates start points of each recording.

Make each entry within 10 seconds, or the Index Search mode will be canceled.
Index marks will be placed for Timer recordings as well.
If any of ttie VHS Index Search System are initiated extremely close to an index mark, the index mark may

not be counted in the search.

In the Program Index Search mode, this VCR can menrrarize a total of 8 programs in order of recording.
If you memorize more than 8 programs, the first program will be deleted and the new program will be listed.