Panasonic OMNIVISION PV-8660 - Manual (Page 16)

Record On a Tape
*lmportant: If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
(^Check list before you begin.
□ All connections are made.
{See pages 6-9.)
□ VCR is plugged in.
Q TV is turned on and set to the VCR
channel (CH 3 or 4),
2 1
4
W® 0 L
Multi Function ^
Display ^
1
Insert a cassette with record tab
VCR power comes on automatically.
Press CH A/'f* or NUMBERED
keys to select a channel.
• Or, press CHANNEL A/T on the VCR.
• Holding down CH A/T will increase
the channel search speed.
• To record from an outside source,
press CH A/W or INPUT to select
“LINE" (see page 17).
Press SPEED to change the
recording speed.
• SP = Standard Play,
LP = Long Play
SLP = Super Long Play
(See page 5.)
4
Press REC/TIME on the remote control or VCR to
start recording.
• To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself oft at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
C
►Normal Ree—►0:30—►1:00
4:00-4—3:00-4—2:00
► 1;00-v
“TIMER" lights in the Multi Function Display,
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP to stop recording.
• Or, press STOP/EJECT on the VCR.
16