Sbleeting audio input lacks (audio select), 1 turn on the video monitor connected to this unit, 2 press ® display on the remote controi – Yamaha RX-V663 User Manual
Page 48: Note, Audio silicnr, Fiuto, Hdmi, Selecting audio input jacks (audio select)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playback
Before performing the following operations, press (5)
AMP
on
the remote control.
SBleeting audio Input lacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to the
same input source.
• We recommend that you set the audio input jack select to
“AUTO” in most cases.
• You can adjust the default audio input jack select of this unit by
using “AUDIO SELECT” in “OPTION MENU” (see page 98).
Press
©AUDIO SELECT
(or
©AUDIO SEL)
repeatedly to select the desired audio input jack
select setting.
Available input sources
liNJLTICH VCR DVR V-AUX DTV/CBL ► OVD MCVCD-R CD TUNEH
XM SHUS
O.SEL: RLITO
Displaying the mmnt status of
this unit on a video monitor
You can display the operating information of this unit on a
video monitor.
1
Turn on the video monitor connected to this
unit.
2
Press ®
DISPLAY
on the remote controi.
The current status screen appears in the OSD.
STATUS
UOL;-40.0dB
MOUIE
Sci-Fi
INPUT:
DUD
A.SEL: HDMI
CDISPLAV]:STATUS OFF
Currently selected audio input jack select setting
• You can select the amount of time that the current status is
displayed in the OSD by using the “OSD-AMP” parameter
in “OPTION MENU” (see page 96).
• To turn off the status screen, press @
DISPLAY
again.
Note
The OSD signal is not output at the DVR and VCR VIDEO
OUT jacks and will not be recorded.
AUDIO SiLiCnr
fiUTO
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
CUHX■••■'OPT
Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL
jack
(2) Digital signals input at the OPTICAL
jack
When no signals are input, no sound is
output.
HNHLUG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jacks
(OPTICAL, COAXIAL and HDMI) are assigned. In addition,
HDMI is not available as an audio input jack select setting when
the HDMI IN jacks are not used. Use “VO ASSIGNMENT” in
“INPUT MENU” to reassign the respective input jack (see
page 93).
44 En