Yamaha RX-V663 - Manual (Page 47)

Playback
Before performing the following operations, press ®
AMP
on
the remote control.
Seteeting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 25) as the input
source.
Rotate the ©INPUT selector to select “MULTI
CH” (or press ©MULTI CH IN).
“MULTI CH” appears in the front panel display.
Use “MULTI CH” menu in “INPUT MENU” to set the
parameters for MULTI CH INPUT (see page 95).
Not0
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the input
source.
Selecting the Iront speaker set
Use this feature to turn the front speaker system (FRONT
A and/or FRONT B) on or off.
Press (S)SPEAKERS on the front panel
repeatedly to turn on or off the set of front
speakers connected to the FRONT A and/or
EXTRA SP speaker terminals.
The active front speaker set changes as follows.
PRONTA. FRONT B -,
L OFF
FRONT A
and ^
FRONTS ^
No1»B
• FRONT A and B or FRONT B setting is not available when
“EXTRA SP ASSIGN” is set to “PRESENCE”, “ZONE 2” or
“NONE” (see page 85).
• Turn off the volume level of this unit when you switch the front
speaker setting.
■ Using the Zone B feature
When you set “EXTRA SP ASSIGN” to “ZONE B” (see
page 85), you can use the speakers connected to the
EXTRA SP speaker terminals in another room (Zone B).
Press ©SPEAKERS on the front panel
repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in
the main room are muted.
Note
If you select the sound field program and activate the Zone B
speakers. Virtual CINEMA DSP activates automatically (see
page 51).
43 En