T to select left and right-hand voices, Transpose, To transpose the keyboard range – Yamaha PSR-310 EN User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Selecting Voices in the Split mode:

In the Split mode, voices can be selected and played separately in the left and right-hand sections of the key

board.

T To select left and right-hand voices:

1. If the VOICE indicator is not lit, press the VOICE/STYLE

(/SOUND EFFECT) button once or twice so that it iights.

2. To change the right-hand voice press any keyboard key to the

right of the Spiit Point, then select a voice in the normal way.

The current right-hand voice number will be shown on the MULTI DIS

PLAY and a new right-hand voice can be selected.

3. To change the left-hand voice press any key to the left of the

Split Point, then select a voice in the normai way.

The current left-hand voice number will be shown on the MULTI DIS

PLAY and a new left-hand voice can be selected.

□ When the Split mode is first selected the cun^mt v&ee is assigned to the right-

hand section of the keyboard and voice number 87 {WOOD BASS) will be

assigned as the default voice to the left-hand section of the keyboard.

□ The left-hand voice is octave-shifted to provide the best sound in the fe0-fiarKl

range.

MJLTI DISPLAY

MULTI DISPLAY

Transpose

The PSR-210 and PSR-310 TRANSPOSE buttons make it possible to shift the pitch of the entire keyboard up or
down in semitone intervals up to a maximum of 12 semitones (one octave). Transposing the pitch of the PSR-
210 or PSR-310 keyboard makes it easier to play in difficult key signatures, and you can simply match the pitch

of the keyboard to the range of a singer or another instrumentalist.

▼ To transpose the keyboard range:

1. Press the TRANSPOSE + or - button.

The first time the TRANSPOSE -i- or - button is pressed, the current
transpose value will appear on the MULTI DISPLAY and remain for ap

proximately 2 seconds afterwards.

2. While the current transpose value is still showing on the dis

play, press the TRANSPOSE + or - button to raise or lower the

pitch.

Holding down either button raises or lowers the pitch continuously.

□ The normal transpose value (0) can be recalled at any time by pressing both

the TRANSPOSE + and - buttons at the same time.

□ Transpose does not affect the voice number 00 (DRUM KIT).

- I

Q) NOBMAL

□

OVERALL CONTROL

TEMPO

TRANSPOSE SPLIT POINT

CHANGE