Pridiom Solar Series Installation Manual - Manual (Page 18)

When installing a module on a roof or building, ensure that it is securely fastened and cannot fall
as a result of wind or snow loads.
When installing a module on a pole, choose a pole and module mounting structure that will
withstand anticipated winds for the area. The pole must have a solid foundation.
Provide adequate ventilation under a module for cooling (5cm minimum air space between module
and mounting surface).
When installing the module on a roof or building, do so in calm winds. Installing a module during
strong winds may cause accidents.
When installing module on a roof, ensure that the roof construction is suitable. In addition, any
roof penetration required to mount the module must properly sealed to prevent leaks.
In some cases, a special support frame may be necessary.
The roof installation of solar modules may affect the fireproofing of the house construction, so it
is necessary to use an earth ground fault circuit breaker. Any unproper installation may cause
accidental injuries.
4. Roof mount
5. Pole mount
Roof mount
Pole m oun t Ground mo unt
17
ELECTRICAL WORK
Fig .43
Fig.44
Fig.45
Fig .46
PDF created with pdfFactory Pro trial version www.pdffactory.com