Wheatheart R Series Augers - Manual (Page 29)

W HEATHEART - R S ERIES A UGERS 6. M AINTENANCE
R8-36, R8-41, R8-46, R8-51, R10-36, R10-41, & R10-51 6.1. F LUIDS & L UBRICANTS
30758 R1 29
6. Maintenance
The Wheatheart Auger has been designed and manufactured to meet the
highest standards, while requiring minimal maintenance. Following a careful
service and maintenance program will provide many years of trouble-free
service.
When performing adjustments, service, or repairs:
• Always take safety into consideation and note Section 2.5.
• Use extra caution when cleaning and servicing augers because flighting
edges can become sharp.
• Follow proper procedures when mounting a tire on a rim. If in doubt, have
a qualified tire repair service perform the required maintenance.
6.1. FLUIDS & LUBRICANTS
E NGINE O IL
Refer to engine operation manual for recommended oil usage.
G EAR O IL
Use SAE approved 90W or equivalent gear oil.
G
REASE
Use SAE multi-purpose high-temperature grease with extreme pressure (EP)
performance or SAE multi-purpose lithium based grease.
6.1.1. S TORAGE & H ANDLING
Always follow manufacturer’s guidelines for the safe and effective storage and
handling of lubricants.
Your machine can operate at top efficiency only if clean lubricants are used. Use
clean containers to handle all lubricants. Store them in an area protected from
dust, moisture, and other contaminants.
Warning:
Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
NOTICE
Do not modify the equipment.
Unauthorized modification may impair the function or safety
of the equipment, could affect the life of the equipment, and
will void your warranty.