Waldmann PULSE HFMD version VFC IV - with MFT, Typ I - Manual (Page 9)

9
Operating Manual Light Control „PULSE HFMD - Vers. IV“ ENG
Change setting
The LED on the light bar indicates
whether a function is active (ON)
or inactive (OFF) by permanent
lighting or flashing, e.g.:
- LED permanently lit:
function is active (ON)
- LED flashing:
function is inactive (OFF)
The function can be activated or
deactivated by using the key I.
Changing basic settings - Part 2
Leave parameterisation mode
The parameterisation mode is left if
no switch has been pressed for 10
seconds. The settings are stored.
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
LED 1 2 3 4 5 6
Fig. 6