Waldmann PULSE HFMD version VFC IV - with MFT, Typ I - Manual (Page 7)

7
Operating Manual Light Control „PULSE HFMD - Vers. IV“ ENG
Operation Main functions
Switching on
Press the switch I - the light chang-
es to light level I.
Press the switch II - the light
changes to light level II.
Switching off
Briefly press the key on which
the LED is lit - this will switch off
the light.
Change light level
Briefly press the key on which the
LED is not lit - this will switch the
light to the other light level.
To change the light level
Press the switch (level I) or the
switch (level II) and keep it pressed.
The appertaining LED [I or II] and
the logo start flashing after approx.
2 seconds. The light changes its
intensity.
To change the dimming direction,
briefly (< 1 sec) release the key and
press it again.
Upon reaching the upper or lower
limit, the LED and the logo flash
more slowly and the intensity
changes direction.
The presently reached dimming
level is stored when you release
the switch.
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II