NTi Audio Minirator MR-PRO - Manual (Page 34)

34
Test Signals
All the sub-folders in the “Wave” folder •
now appear in the folder selection 1 .
Add additional sub-folders to this folder
level as required.
If necessary, you can make use of the
•
other standard possibilities of a remov-
able data medium. For example, you can
copy wav-files from the MR-PRO onto
your computer or delete unnecessary
files.
The absolute level generated at the out-
•
put depends on the modulation as well
as the signal form of the data present in
the WAV file.
Example: A fully modulated sinusoidal
•
signal played back at 0 dBF generates an
absolute level of 18 dBu at the output.
Open the “WAVE” sub-folder on the removable medium •
Open one of the sub-folders in the “WAVE” folder. •
Copy the desired files into the folder. •

You have now loaded your Wave files.
WAVE
FOLDER1 FOLDER2 ...
• Signal1.wav
• Signal2.wav
• ...
• Signal1.wav
• Signal2.wav
• ...
Parameters
Output level
The output level of this test signal is adjusted in
dBF (dB full scale) or %.