NTi Audio Minirator MR-PRO - Manual (Page 23)

23
Firmware
Display of the version number, with the possibility of carrying
out an update for the MR-PRO
4 (see chapter “Updating the
Firmware”).
Display of the serial number
You can read out the instrument’s serial number 5 from the
bottom line.
Setting the contrast
Changing the contrast of the screen display.
To do this, proceed as follows:
Hold down the “ESC” button and turn the rotary wheel until •
the desired contrast is obtained.

You have now changed the contrast of the screen display.
Operation
Backlight
You can choose between “Auto” and “Manual”.
Auto The backlight will be switched on automatically
during operation, and will be switched off again
after a period of time.
Manual Press the “On/Off” button to switch the back-
ground lighting on and off.
To do this, select the Backlight • 3 function with the rotary
wheel.
Press “Enter”.
•

The display now changes between “Auto” and “Manual”.