NTi Audio Minirator MR-PRO - Manual (Page 33)

33
Test Signals
Default wav-files
The factory default wav-files are •
Ansagen: Anpassen (German) •
Testsequenz (German)
Messages: Adjust (English) •
Occupied (English)
Test sequence (English)
Signals: NTi Audio STI-PA •
Sounds: Drum1 •
Drums2
Hihat
Sax
Synth1
Further customized wav-files are available for download on the
Minirator support page at “http://my.nti-audio.com”.
Copyright
NTi Audio delivers a set of demonstration
wave files with the MR-PRO. These wave
files may only be replayed with an NTi Audio
instrument (MR-PRO). Any further usage is
forbidden.
Loading your own wav-files
Wave files for the MR-PRO must fulfill the following require-
ments:
48 kHz sampling frequency •
Mono / Stereo •
16 Bit resolution •
If a wave file does not meet the require-
ments, the playback stops and the “Mute”
button lights up continuously red. Wav-files
can be converted to the above requirements
by a free software available for download at
www.nti-audio.com.
To load WAV-files, you will need a computer
with the following minimum specifications:
PC with Windows 98SE •
Macintosh computer with OSX •
Connect the MR-PRO to the computer via USB. •

The MR-PRO appears on your computer as a removable
data medium.