Brother HL-1260 - Manual (Page 163)

VI - 11
Error Message Meaning Action
42 CARD FULL
43 CARD W ERR
44 SIMM ERROR
45 MIO ERROR
46 OPT IO ERROR
47 CARD R ERROR
XX SIZE ERROR
IGNORE DATA
(BR- Script 2 mode only)
(*HL-1660 ONLY)
48 INCORRECT LT
49 INCORRECT DX
Delete unnecessary
macros or fonts, or use a
new card.
Set the write protect
switch of the card to OFF
if it has been set to ON.
Use a new card. If the
same error occurs,
consult your dealer or
service personal.
Install SIMMs correctly,
referring to the printed
error message.
Install the MIO card
correctly.
Check the interface cable
connection between the
printer and the fitted
option.
Use a new card, If the
same error occurs,
consult your dealer or
service personal.
Set the correct size of
paper in T2 or for duplex
printing.
Press the RESET switch.
Use LT for HL-1660
Use DX for HL-1660
Card overflow
Card write error
Incorrect installation of
SIMMs
Error in communication
with the MIO card.
Connection error with
optional feeders and
duplex unit.
Card read error
Paper of incorrect size is
loaded into XX. XX is T2/
DX.
Data is ignored because
of an error in the Post
Script program.
Equipping LT for 1260/e
Equipping DX for 1260/e