InnoMax Adjustable Bed Base - Manual (Page 13)

PowerBASE™ Owners Manual 99300787-i
13
insTallaTiOn
12. Install headboard brackets to the
bed base frame per the following
instructions:
Note: Headboard brackets are optional for
Type B beds. See accessory sheet for order
information.
a. Raise the head section of the bed
(with hand control) to gain access to
the bed base frame.
b. Determine bed base type ( FIGurES
16 and 17). For bed base Type A,
proceed to Step “e”. For bed base
Type B, proceed to Step “c”.
fiGure 18: Channel connector kit. (used with adjustable
bed base Type B. See accessory sheet).
fiGure 19: Channel connector mounting holes.
fiGure 16: adjustable bed base Type a.
fiGure 17: adjustable bed base Type B.
c. For bed base Type B, locate channel
connector kit ( FIGurE 18). on one
side of bed base frame, locate
(2) holes for channel connector
mounting (
FIGurE 19).
adjusTaBle
Bed Type a
adjusTaBle
Bed Type B
80” Base
lenGTH
MOunTinG
HOles
74” Base
lenGTH
MOunTinG
HOles
(2) CHannel
COnneCTOr
MOunTinG
HOles