BenQ SP831 - Manual (Page 45)

Operation 45
Fine-tuning the picture quality
No matter what picture mode you have selected, you are able to fine-tune those settings to fit
every presentation purpose. Those adjustments will be saved to the preset mode you are at
when you exit the OSD menu.
Adjusting Brightness
Highlight Brightness in the Picture -- Basic menu and
adjust the values by pressing
/ on the projector or
remote control.
The higher the value, the brighter the picture. And
lower the setting, darker the picture. Adjust this control
so the black areas of the picture appear just as black and
that detail in the dark areas is visible.
Adjusting Contrast
Highlight Contrast in the Picture -- Basic menu and
adjust the values by pressing
/ on the projector or
remote control.
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting Color
Highlight Color in the Picture -- Basic menu and adjust the values by pressing / on
the projector or remote control.
Lower setting produces less saturated colors; setting to the minimum value makes the image
black and white. If the setting is too high, colors on the image will be overpowering, which
makes the image unrealistic.
Adjusting Tint
Highlight Tint and adjust the values by pressing / on the projector or remote control.
The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.
Adjusting Sharpness
Highlight Sharpness and adjust the values by pressing
/ on the projector or remote control.
The higher the value, the sharper the picture becomes.
The lower the value, the softer the picture becomes.
+50 +30 +70
+30 +50 +70
+50 +30 +70