Konica Minolta bizhub C550 User Manual
Page 76
User mode
2
C550
2-41
If “IP Address Fax” was selected
2
Note
“IP Address Fax” appears if the IP address fax operation is available.
Index
Select the index characters for the destination. To normally display
the destination in the touch panel, check the “Main” check box.
Destination
Type in the fax number for the destination (up to 38 characters, in-
cluding only numerals, #, *, -, T, P and E).
Confirm Fax Number
Enter the fax number again in order to prevent misentering of the fax
number.
This menu item appears when “Confirm Address (Register)” is set
to [ON] from the control panel.
Line Setting
Select the line to be used (“No Selection”, “Line 1” or “Line 2”). A
setting can be selected if the optional fax multi line is installed.
Communication Setting
Click the [Display] button, and then select the check box for a dis-
played setting (“V34 Off”, “ECM Off”, “International Communica-
tion” or “Check Destination”).
Limiting Access to Desti-
nations
To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for “Search from Reference Allowed
Group” appear.
If “Search from Reference Allowed Group” is selected, click the
[Search from List] button, and then select an access permission
group from the list. If “Set direct Reference Allowed Level” is select-
ed, select a level.
Item
Description
No.
Specify the registration number.
Select “Use opening number” or “Direct Input”. If “Direct Input” is
selected, type in the number. If “0” is specified, the user box is au-
tomatically registered with the next available number.
Name
Type in the name of the destination (up to 24 characters).
Index
Select the index characters for the destination. To normally display
the destination in the touch panel, check the “Main” check box.
Host Address
Type in the IP address or host name for the destination fax (up to 63
characters). To type in the host name, check the “Please check to
enter host name.” check box. If the machine is set to use IPv6, an
IPv6 address can also be specified.
Port No.
Type in the port number. (Range: 1 to 65535; Default: 25)
Destination Machine
Type
Select whether the destination is a color or monochrome machine.
Item
Description