Konica Minolta bizhub C550 - Manual (Page 114)

Administrator mode 3
C550 3-7
Status Notification Setting page
Item Description
Notification Address Type in the notification address.
Replenish Paper Tray Notifies when the paper tray runs out of paper.
JAM Notifies when a paper misfeed occurs.
PM Call Notifies when a periodic inspection should be performed.
Replace Staples Notifies when there are no more staples.
Replenish Toner Notifies when there is no toner.
Finisher Tray Full Notifies when the finisher tray capacity has been reached.
Service Call Notifies when there is a service call.
Job Finished Notifies when the job is completed (successfully).
Hole-Punch Scrap Box
Full Notifies when the punch scraps must be removed.
Waste Toner Box Full Notifies when the waste toner box must be replaced.
Imaging Unit Yield Notifies when the imaging unit must be replaced.
Fusing Unit Yield Notifies when the fusing unit must be replaced.
Transfer Roller Yield Notifies when the transfer roller unit must be replaced.
Transfer Belt Unit Yield Notifies when the image transfer belt unit must be replaced.