5 [finishing, Finishing] -11, P. 3-11 – Konica Minolta bizhub 552 User Manual
Page 32
bizhub 652/552
3-11
3.2
[Basic]
3
3.2.5
[Finishing]
Various settings can be selected for sorting and finishing copies fed into the Output Tray.
0
The Staple setting is available only if the optional Finisher is installed.
0
The Punch setting is available only if the Punch Kit is installed on the optional Finisher.
0
The Half Fold and Center Staple & Fold settings are available only when the Saddle Stitcher is installed
on the optional Finisher.
0
The Tri-Fold setting is available only if the Saddle Stitcher SD-508 is installed on the optional Finisher
FS-526.
0
The Z-Fold setting is available only if the Z-folding unit is installed on the optional Finisher FS-526.
0
[Staple] cannot be used together with [Offset].
0
[Half-Fold], [Center Staple & Fold], and [Tri-Fold] cannot be used together with any of [Offset], [Staple],
and [Punch].
%
Press [Basic] ö [Finishing].
Reference
-
The displayed window varies depending on the installed options.
Settings
[Collate (By Set)]
When multi-page originals are copied for multiple sets, copies can be fed
out sorted by set of copies.
[Group]
When multi-page originals are copied for multiple sets, copies can be fed
out sorted by pages.
1
1
1
4
3
2
1
4
3
2
1
1
1
1