Konica Minolta bizhub 552 - Manual (Page 21)

bizhub 652/552 2-13
2.2 Loading originals 2
2.2 Loading originals
Place the original in the ADF or on the Original Glass. Select the optimal position for setting the original ac-
cording to the type of the original to be copied.
- By using the ADF, a multi-page original can be fed automatically one page at a time. The ADF can also
be used to automatically scan 2-sided originals.
- When you are using the Original Glass, place the original directly on the Original Glass to scan. This
method is suited for originals in the form of a book and the like that cannot be fed through the ADF.
Loading the original into the ADF
1
Slide the Lateral Guide to fit the size of the original.
2
Load the original face up in the Original Tray and arrange accord-
ing to the scanning order.
% Place the original pages so that the top of the original is to-
ward the back side of the machine.
% Do not stack originals exceeding the , mark.
% If the original is loaded in any orientation other than with the
top of the original toward the back of the machine, be sure to
select the original orientation.
3
Slide the adjustable Lateral Guide against the edges of the orig-
inal.
Placing the original on the Original Glass
1
Lift open the ADF 15 degrees or more.
% Unless you lift the ADF more than 15 degrees to open it, the correct document size may not be de-
tected.
2
Place the original face down on the Original Glass.
% Place the original pages so that the top of the original is to-
ward the back or the left side of the machine.
% Align the original with the mark in the back-left corner of the
Original Scale.
% For transparent or translucent originals, place a blank sheet of
paper of the same size as the original over the original.
3
Close the ADF.
d
Reference
For details on originals that cannot be placed on the original glass or loaded into the ADF, refer to the [User's
Guide Copy Operations].