Konica Minolta bizhub 552 - Manual (Page 28)

bizhub 652/552 3-7
3.2 [Basic] 3
When very few sheets of paper remain in the paper tray, the icon indicating remaining paper quantities ap-
pears.
When other than plain paper is loaded in the paper tray, the icon indicating the paper type appears.
[Change Settings] [Paper Size] When you have selected Tray 1/2 or Bypass Tray,
press this button to specify the paper size.
•
[Auto Detect]: The paper size is automatically
detected.
• [12-1/4 e 18 w] (Tray 1/2 only): Select 12-1/4
e 18 w for Paper Size.
• [Inch Sizes] (only for Bypass Tray): Select the
loaded paper size from the standard inch siz-
es.
• [Metric Sizes] (only for Bypass Tray): Select
the loaded paper size from the standard met-
ric sizes.
• [Other] (only for Bypass Tray): Select the
loaded paper size from the standard sizes
other than the standard metric and inch sizes.
• [Custom Size] (only for Bypass Tray): Select
the loaded paper size from the registered cus-
tom sizes.
The Custom Size settings cannot be config-
ured when no custom size is registered.
• [Wide Paper] : The paper size larger than the
original size can be selected.
[Main Screen] Press this button to return to the basic settings screen with the changed
settings applied.
Indicates that very little paper remains in the paper tray.
Indicates that there is no paper in the paper tray.
[Single Side
Only] [Special Pa-
per] [Thick 1] [Thick 1+] [Thick 2] [Thick 3]
[Thick 4] [Transparen-
cy] [Letterhead] [Colored Pa-
per] [Envelope] [User Paper 1]
[User Paper 2] [User Paper 3] [User Paper 4] [User Paper 5] [User Paper 6] [Duplex 2nd
Side]
[Plain Paper]
[Duplex 2nd
Side]
[Thick 1]
[Duplex 2nd
Side]
[Thick 1+]
[Duplex 2nd
Side]
[Thick 2]
[Duplex 2nd
Side]
[Thick 3]
[Duplex 2nd
Side]
[Thick 4]
[Duplex 2nd
Side]
[User Paper 1]
Settings